WAFER-PV-D5252 (3.5" Intel® Atom™ SBC)

3.5” SBC with Intel® Atom™ N2600 1.6 GHz, DDR3, VGA/dual LVDS, dual GbE, USB 2.0, SATA 3Gb/s, Audio, RoHS
Quote a Custom Order
  • Intel® Atom™ D525 dual-core processor 1.8GHz/1MB L2 cache
  • One 204-pin 800MHz DDR3 SDRAM SO-DIMM supported (System max. 4GB)
  • 12V only single voltage design for AT/ATX power
  • Open frame heatsink thermal design for fanelss solution
  • Support VGA and 18-bit single-channel LVDS with dual-display support
  • Complete I/O with eight USB, two SATA 3Gb/s, one CF II, six COM and audio
  • IEI One Key Recovery solution allows you to create rapid OS backup and recovery
CPU Intel® Atom™ D525 dual-core processor 1.8GHz/1MB L2 cache
System Chipset ICH8M
System Memory One 204-pin 800MHz DDR3 SDRAM SO-DIMM supported (System max. 4GB)
Ethernet Dual GbE by Realtek RTL8111E, LAN1 with ASF2.0 support
I/O 5 x RS-232
1 x RS-232/422/485 with Auto Flow control
1 x KB/MS
2 x SATA 3Gb/s
8 x USB 2.0
1 x CF Type II
Digital I/O 8-bit digital I/O
4-bit input / 4-bit output
Super I/O Fintek F81865
SMBus 1 x 4-pin wafer connetor
Audio Realtek ALC662 HD codec
Display Interfaces Analog CRT up to 2048x1536 for D525
Support for CRT hot-plug
Single-channel 18-bit LVDS
Expansion 1 x PCIe Mini card slot (PCIe + USB + SATA signal) support IEI mini DOM
Watchdog Timer Software programmable supports 1 ~255 sec. System reset
Power Supply 12V input only
Fan 1 x 3-pin CPU fan
1 x 3-pin system fan
Power Consumption 12V@1.79A (Intel® Atom™ D525 1.8GHz with DDR3 1GB)
Graphic GMA 3150
Graphic core speed 400MHz for D525
Temperature -20°C ~ 60°C with free air, -20°C ~ 70°C with force air for D525 processor
Humidity Operation: 5% ~ 95%, non-condensing
Weight GW: 600g / NW: 250g
WAFER-PV-D5252-R11 3.5" SBC with Intel® Atom™ D525 1.8GHz Dual Core CPU, DDR3,VGA/LVDS, Dual GbE, USB2.0 and SATA 3Gb/s, audio, RoHS
32000-070301-RS Dual port USB cable
32205-000300-100-RS RS-232/422/485 cable

Have a Question

Please fill out the form below and a member of our team will be in touch shortly.

Attach a file...