WAFER-CV-D25502 (3.5" Intel® Atom™ SBC)

3.5 inch Biscuit SBC with Embedded AMD® LX800 Processor, Audio, VGA/LVDS, TTL/LVDS, 4 x USB 2.0, 7 x RS-232, and 1 x RS-422/485
Quote a Custom Order
  • Intel® Atom™ dual core D2550 1.86 GHz/ 10W TDP processor
  • On-board DDR3 1066MHz 2GB SDRAM
  • 12V only single voltage design for AT/ATX power
  • 24-bit single channel LVDS via D2550 CPU
  • Supporting PCI-104 and mSATA capabilities
  • IEI One Key Recovery solution allows you to create rapid OS backup and recovery
CPU Intel® Atom™ dual core D2550 1.86 GHz/ 10W TDP processor
System Chipset Intel® NM10
System Memory On-board DDR3 1066MHz 2GB SDRAM
Ethernet Dual Realtek RTL8111E PCIe GbE controllers, LAN1 with ASF2.0 supported
I/O 5 x RS-232
1 x RS-422/485
1 x 6-pin wafer for PS/2 KB/MS
2 x SATA 3Gb/s with 5V power connector
4 x USB 2.0 (2 on rear I/O, 2 by pin header)
Digital I/O 8-bit programmable I/O
(4-bit in/ 4-bit out)
Super I/O Fintek F81866
Audio Realtek ALC662 HD codec
Display Interfaces 1 x VGA Integrated in Intel® CPU
(Resolution up to 1920x1200)
Single-channel 24-bit LVDS
(Resolution support up to 1440x900)
Expansion 1 x full size PCIe Mini card slot with mSATA support
1 x PCI-104 slot supports PCI singal
Watchdog Timer Software programmable support 1~255 sec. system reset
Power Supply 12V only, AT/ATX supported
Fan 1 x 3-pin (1x3) CPU fan connector (smart fan support)
Power Consumption 12V@1.19A (1.86GHz Intel® Atom™ D2550 with on-board 1GB 1066MHz DDR3 SDRAM)
Graphic GMA 3650 with 640MHz graphic core speed for D2550
Temperature -20°C ~ 60°C with free air, -20°C ~ 70°C with force air for D2550 processor
Humidity 5%~95%, non-condensing
Dimensions 146mm x 102mm
Weight GW: 600g/ NW: 250g
WAFER-CV-D25502-R10 3.5” SBC supports Intel® Atom™ D2550 1.86MHz processor with 2GB DDR3 memory down, VGA/LVDS, Dual GbE, PCI/104, USB 2.0, SATA 3GB/s and Audio
32000-070301-RS Dual ports USB cable
32200-074800-RS RS-422/485 cable

Have a Question

Please fill out the form below and a member of our team will be in touch shortly.

Attach a file...