IMBA-C2260-i2
ATX Motherboard Supports LGA1155 Intel® Core™ i7/i5/i3/Pentium®/Celeron® CPU with Intel® H61, DDR3, VGA/DVI-D, Dual Realtek PCIe GbE, USB 2.0, SATA 3Gb/s, HD Audio and RoHS
- LGA1150 Intel® Xeon® E3/Core™ i3/Pentium®/Celeron® processor supported
- Dual-channel DDR3 1600/1333MHz support up to 32GB
- Intel® PCIe GbE with Intel® AMT 9.0 support
- Support PCI Express generation 3.0 at 8GT/s I/O bandwidth
- USB 3.0, SATA 6Gb/s and mSATA supported
- High-speed interface for one PCIe x8 or two PCIe x4 add-on cards
- IEI jumper-less function
- IEI One Key Recovery solution allows you to create rapid OS backup and recovery
- Support IPMI 2.0 via iRIS-2400 module
| CPU | LGA1150 Intel® Xeon® E3, Core™ i3, Pentium® or Celeron® processor supported |
| System Chipset | Intel® C226 |
| BIOS | UEFI BIOS |
| System Memory | Four 240-pin 1600/1333MHz dual-channel DDR3 & DDR3L SDRAM ECC and non-ECC unbuffered DIMMs support up to 32GB |
| Ethernet | Intel® I210 PCIe controller Intel® I217 with Intel® AMT 9.0 supported |
| I/O Interface | 5 x RS-232 4 x USB 3.0 (rear IO) 1 x RS-422/485 8 x USB 2.0 (4 x rear IO, 4 by pin header) 6 x SATA 6Gb/s 1 x mSATA (colay SATA port) 1 x LPT 1 x 6-pin wafer for PS/2 KB/MS |
| Digital I/O | 8-bit Digital I/O (4-bit input, 4-bit output) |
| Super I/O | Fintek F81866 |
| TPM | 2 x 10-pin pin header |
| SMBus | 1 x 4 pin wafer |
| Audio | Realtek ALC662 HD Audio codec (Line-in, Line-out, Mic) |
| Display Interfaces | VGA (up to 1920x1200 @ 60 Hz) iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160 @60 Hz) |
| LAN | 2 x 2-pin header for LAN1 LED, LAN2 LED |
| Expansion | 2 x PCI slot 3 x PCIe x4 slot (support PCIe x1) 1 x PCIe x1 slot 1 x PCIe x16 slot (with x8 signal) |
| Watchdog Timer | Software programmable support 1~255 sec. system reset |
| Power Supply | ATX Power Supply |
| Fan | 1 x 4-pin CPU fan connector 2 x 3-pin system fan connector |
| Power Consumption | 3.3V@0.57A, 5V@4.50A, 12V@0.14A, Vcore@5.20A, 5VSB@0.19A (Intel® 3.10GHz CPU with four 1333MHz 2GB DDR3 memory) |
| Graphic | Intel® HD Graphics Gen 7.5 supports DX11.1 and OpenCL 1.2, OpenGL 3.2 Full MPEG2, VC1, AVC Decode |
| Operating Temperature | Operating Temperature: -20°C ~ 60°C |
| Humidity | 5% ~ 95%, non-condensing |
| Dimensions | 244mm x 305mm |
| Weight | GW:1200g, NW: 700g |
| Front Panel | 1 x Front_Panel (Power LED, HDD LED, Speaker, Power Button, Reset Button) |
| I2C | 1 x 4 pin wafer |
| Front Audio | 2 x 5-pin header |
| IMBA-C2260-i2-R11 | ATX motherboard supports 22nm LGA1150 Intel® Xeon E3, Core™ i3, Pentium® and Celeron® per Intel® C226, DDR3, VGA, Dual Intel® PCIe GbE, four USB 3.0, six SATA 6Gb/s, HD Audio, iRIS-2400 and RoHS |
| Accessories | |
| iRIS-2400-R10 | IPMI 2.0 adapter card with AST2400 BMC chip for DDR3 SODIMM socket interface |
| 19800-003100-200-RS | Dual ports USB cable with bracket |
| 19800-010500-100-RS | USB 3.0 cable 457mm with bracket |
| 32205-003800-100-RS | RS-422/485 cable, 200mm |
| 19800-000051-RS | RS-232 cable, 230mm |
| 32102-000100-200-RS | SATA power cable, MOLEX 5264-4P to SATA15P |
| 19800-000075-RS | 6-pin header PS/2 KB/MS Y-cable with bracket, 220mm |
| 19800-000049-RS | LPT cable |
| CF-1156A-RS-R11 | High performance LGA1155/LGA1156 cooler kit, 1U chassis compatible, 73W |
| CF-1156E-RS-R11 | High performance LGA1155/LGA1156 cooler kit, 95W |
| DP-HDMI-R10 | DisplayPort to HDMI converter board (For iEi IDP connector) |
| DP-DVI-R10 | DisplayPort to DVI-D converter board (For iEi IDP connector) |
| DP-VGA-R10 | DisplayPort to VGA converter board (For iEi IDP connector) |
| TPM-IN01-R11 | 20-Pin Infineon TPM module, software management tool, firmware V3.17 |
| DP-LVDS-R10 | DisplayPort to 24 bit dual channel LVDS converter board (For iEi IDP connector) |
Have a Question
Please fill out the form below and a member of our team will be in touch shortly.