IMB-H810-i2
Mini-ITX SBC supports socket LGA775 Intel® Core™ 2 Quad CPU with 1333MHz FSB, DDR3, VGA, Dual PCIe GbE, 6 COM, 4 SATA 3Gb/s,Audio,and TPM (Optional), RoHS
- LGA1150 Intel® 4th generation Core™ i7/i5/i3, Pentium® or Celeron® processor supported
- Dual-channel DDR3 1333/1600 MHz support up to 16GB
- Intel® HD Graphics technology integrates high-performance graphics and media processing
- Supports legacy PCI 32-bit 33/66MHz
- Ten COM ports, USB 3.0, SATA 6Gb/s and mSATA supported
- TPM V1.2 hardware security function supported by TPM module
- IEI One Key Recovery solution allows you to create rapid OS backup and recovery
- Support IPMI 2.0 via iRIS-2400 module
- IEI jumper-less function
| CPU | LGA1150 Intel® 4th generation Core™ i7/i5/i3, Pentium® or Celeron® processor supported |
| System Chipset | Intel® H81 |
| BIOS | UEFI BIOS |
| System Memory | Two 240-pin 1600/1333MHz dual-channel DDR3 & DDR3L SDRAM unbuffered DIMMs support up to 16GB |
| Ethernet | GbE1: Intel® I217LM with Intel® AMT 9.0 support GbE2: Intel® I210-AT PCIe controller with NCSI support |
| I/O Interface | 2 x RS-232 (rear IO) 8 x RS-232 (port 3~6, port 7~10) 1 x LPT 1 X RS-422/485 by s/w selection (colay COM10) 1 x PS/2 KB/MS 2 x SATA 6Gb/s 2 x USB 3.0 (rear IO) 2 x SATA 3Gb/s 10 x USB 2.0 (2 by rear IO, 8 by pin header) |
| Super I/O | Fintek F81866 |
| TPM | 1 x 20-pin (2x10) header |
| SMBus | 1 x 4-pin wafer |
| Audio | Realtek ALC662 HD Audio codec |
| Display Interfaces | VGA1 (up to 1920x1200 @ 60 Hz) VGA2 (up to 1920x1200 @ 60 Hz) iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160 @60 Hz) |
| Expansion | 1 x PCIe x16 slot (Gen 3) 1 x PCIe x1 slot 2 x PCI slot |
| Watchdog Timer | Software programmable, support 1~255 sec system reset |
| Power Supply | ATX power supply |
| Power Consumption | 3.3V@0.64A, 5V@4.20A, 12V@0.14A, Vcore_12V@3.88A, 5VSB@0.20A (Intel® Core™ i7-4770K 3.90 GHz CPU with 8GB (2 x 4GB) 1333MHz DDR3 memory) |
| Audio Input | Line-in, Line-out (with 3.5W +3.5W audio ampliier), Mic |
| Graphic | Intel® HD Graphics Gen 7.5 supports DX11.1 and OpenCL 1.2, OpenGL 3.2 Full MPEG2, VC1, AVC Decode |
| Operating Temperature | -20°C ~ 60°C |
| Humidity | 5% ~ 95%, non-condensing |
| Dimensions | 244mm x 244mm |
| Weight | 1200g / NW: 680g |
| Front Panel | 1 x Front panel (Power LED, HDD LED, Speaker, Power Button, Reset Button) |
| I2C | 1 x 4-pin wafer |
| Fan Connector | 1 x 4-pin CPU fan connector 1 x 3-pin system fan connector |
| iRIS Remote Management Module | 1 x iRIS-2400 slot |
| LAN LED | 2 x 2-pin headers for LAN1 Link LED, LAN2 Link LED |
| IMB-H810-i2-R11 | microATX motherboard supports 22nm LGA1150 Intel® Core™ i7/i5/i3/Pentium® and Celeron® CPU per Intel® H81, DDR3, VGA, Dual Intel® PCIe GbE, USB 2.0, PCI, COM, SATA 6Gb/s, LPT, HD Audio, iRIS-2400 and RoHS |
| Accessories | |
| iRIS-2400-R10 | IPMI 2.0 adapter card with AST2400 BMC chip for DDR3 SO- DIMM socket interface |
| 32205-001203-100-RS | RS-232 cable, 40-pin to four DB-9 |
| 19800-003100-200-RS | Dual-port USB 2.0 cable with bracket |
| 19800-010500-100-RS | USB 3.0 cable 457mm with bracket |
| 32205-003800-100-RS | RS-422/485 cable, 200mm |
| 19800-000051-RS | RS-232 cable, 230mm (P=2.54) |
| 32102-000100-200-RS | SATA power cable, MOLEX 5264-4P to SATA15P |
| 19800-000075-RS | PS/2 KB/MS Y-cable with bracket, 220mm |
| 19800-000049-RS | LPT cable |
| CF-1156A-RS-R11 | High performance LGA1155/LGA1156 cooler kit, 1U chassis compatible, 73W |
| CF-1156E-R11 | High performance LGA1155/LGA1156 cooler kit, 95W |
| DP-LVDS-R10 | DisplayPort to 24-bit dual-channel LVDS converter board (for IEI iDP connector) |
| DP-HDMI-R10 | DisplayPort to HDMI converter board (for IEI iDP connector) |
| DP-DVI-R10 | DisplayPort to DVI-D converter board (for IEI iDP connector) |
| DP-VGA-R10 | DisplayPort to VGA converter board (for IEI iDP connector) |
| DP-DP-R10 | DisplayPort to DisplayPort converter board (for IEI iDP connector) |
| TPM-IN01-R11 | 20-pin infineon TPM module, software management tool, firmware V3.17 |
Have a Question
Please fill out the form below and a member of our team will be in touch shortly.