| LCD Size | 5.7" |
| Max Resolution | 640 x 480 |
| Brightness (cd/m²) | 400 |
| Contrast Ratio | 300 : 1 |
| LCD Color | 262K |
| Pixel Pitch (mm) | 0.06(H) x 0.18(V) |
| Viewing Angle (H-V) | 140°/100° |
| Backlight MTBF | 50000 hrs |
| CPU | Alchemy AU1250 500MHz |
| Memory | 256MB DDR2 SDRAM |
| I/O Ports | 1 x RS-232 COM Port 1 x RS-422/485 COM Port 1 x RJ-45 for 10/100Mbps Ethernet with PoE 2 x USB 2.0 1 x Power Jack 1 x Reset Button 1 x 5 Pin Terminal Block for Signal Input 2 x Digital Input * 3 x GND 1 x 8 Pin Terminal Block for Relay Output 2 Relay (One NC and one NO contacts for Alarm, One NC and one NO contacts for Lock) *Low level(0): 2V MAX., High level (1): +4~+50V |
| Watchdog Timer | Software programmable supports 1~255 sec. System reset |
| Audio | AMP 2W + 2W |
| Expansion | Webcam & Mic Function |
| LED Front Panel | 1 x Power ON/OFF LED on Front Panel |
| HDD Drive Bay | SD Card |
| Construction Material | ABS + PC Plastic front frame |
| Mounting | Panel, Wall, VESA 75mm x 75mm |
| Front Panel Color | Blue & White |
| Dimension (WxHxD) (mm) | 215 x 207 x 52.7 |
| Operation Temperature | -10°C ~60°C |
| Storage Temperature | -20°C ~70°C |
| EMC | CE, FCC, CCC |
| Net Weight | 0.7Kg |
| IP Level(front panel) | IP64 |
| Safety | CB |
| Touch Screen | Resistive Type 4-Wire |
| Power Adapter | 63000-FSP040DGAA1106-RS Power: 40W Input: 90VAC~264VAC, 50/60Hz Output: 12VDC |
| Power Requirement | 12V DC-IN |
| Power Consumption | 9W Maximum 21W (include Max 12V@1A internal Power output) |
| RFID | Working: Frequency EM 125KHz and MIFARE 13.56MHz Reading: Range 1~3 cm (Under 13.56MHz)/ 5 cm (Under 125KHz) |
| ACT-457A-AU1250/T-R/256MB-R10 | 5.7" 400cd/m² VGA fanless panel PC with Alchemy AU1250 500Mhz, touch screen, 0.3M camera, MIFARE & EM RFID module, door control, 256MB DDR2, ROHS |
| ACT-457A-1250/T-R/POE/-R10 | 5.7" 400cd/m² VGA fanless panel PC with Alchemy AU1250 500Mhz, touch screen, 0.3M camera, MIFARE & EM RFID module, door control, IEEE802.3at PoE, 256MB DDR2, ROHS |
Please fill out the form below and a member of our team will be in touch shortly.